![]() to provide top clearance), the bottom clearance is fixed. ![]() While wood drawer box height can be plus or minus a constant (e.g. All drawer/face combos can be located anywhere in the stack. While the boxes cannot center on the faces, they will all be the same distance from the top and bottom of all faces. Doing this provides a consistent relationship between the drawer boxes and faces. Like the faces, all drawer boxes are some increment of 32mm tall. The following covers ways to minimize wasted space, but the bottom line is that you either use the 32mm system and waste some space, or trade some of the consistency that the system provides for more usable space. Because the drawer slides are mounted some multiple of 32mm apart, the reduced bottom drawer clearance results in wasted space under the rest of the drawers. Moving the cabinet bottom up reduces the size of the bottom drawer opening and the distance from the drawer slide mounting hole to the bottom of the cabinet. The only way to get a full overlay on the bottom of the cabinet is to move the bottom of the cabinet up (any other option breaks the system, e,g, unbalanced hinge cup boring). Bottom clearance ( BC), the distance from the drawer slide mounting holes to any horizontal component, is the same for all openings. With half-overlay and inset cabinets, all horizontal carcase components (top, bottom and stretchers/rails) center on, or between, system holes and all drawer openings are the same size (when drawer rails are used).
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |